My Blog

My WordPress Blog

Important Do’s And Don’ts For Apparel Screen Printing Services

To get the first-class pleasant printing services with screen printing, you need a flat floor between the pallet and the screen. The fronts and backside of the t-shirt have to be smooth and consistent, which enables you to get the best print each time. However, printing over a seam, pocket, or zipper, creates inconsistency and when you print over these portions; it creates a gap in the print where the ink from the display does no longer touches the shirt due to the ridge.

Types of Shirts That are not Suitable for Apparel Screen Printing Services

  • Tank Tops: Tank tops are typically low reduced at the sides of the neckline and the sleeves. Printing jumbo prints on these garments can cause defects from printing over the seams.
  • V-necks: The deep cut of the V-neck may also not be capable to accommodate the whole of jumbo print, so make sure you print something a little smaller.
  • Girls Tees: Jumbo pallets are fuller than most lady tees. To get it into the press, it has to be stretched. This may also bring a couple of troubles such as ripped fabric, loss of form, distorted photographs and design being reduce off from the backside or sides of the shirt.

Screen printing services have advanced to a point the place it can create an enormous amount of detail on the t-shirt, which was no longer feasible almost a decade ago. But, you can’t imagine the same degree of detail on all kinds of clothes such as ribbed garments, canvas, burnout tees, and pique polos, etc. These objects don’t create a lot of detail due to the fact they are not smooth like trendy t-shirts.

Major Issues in Printing Hoodies

Hoodies are one of the hardest garments to print on. On the different hand, it is one of the pleasant clothing products throughout the winter. So, here are a few problems you have to be conscious about while printing hoodies:

  • Double-lined hoodies can print one color ink and no under the base. As they slide around on the press, one cannot precisely register a couple of colors.
  • Sometimes the pockets have to be glued down to print on top of the hoodies, and consequently, many clients acquire their hoodies pocket with traces of glue.
  • Prints on the hoodies depend on the brand of sweatshirt being printed. If it is double lined, the design is generally warmth pressed. Only single-lined sweaters work with hood prints.
  • Print may seem irregular around the pocket seams and zippers. It may additionally create a hole in the print, which is undesirable.

Hoodies are made with thick material and soak up a lot of ink. The color of the sweatshirt may affect the color of the print. To get the best quality of screen printing when going over zippers or pockets, it is recommended to use 100% cotton or an 80/20 combo and the usage of all discharge colors except the under the base. Getting the same design on the t-shirts as well as hoodies may additionally cost extra.

Leave a Reply

Your email address will not be published. Required fields are marked *